LinTech
LinTech has designed, engineered, and manufactured positioning components and systems for use in a wide range of Linear Motion Control applications.
Linear Precision Shafting Products
Lintech provides precision 60 case hardened linear shafting in inch diameters from 0.25 to 2.0 inches. We cut to any length desired, up to the maximum length of any given shaft diameter.
- SL Series – Class L, maximum length 184 inches
- SS Series – Class S, maximum length 184 inches
- SL-PD Series – Class L, maximum length 184 inches
- SN Series – Class N, maximum length 184 inches
- SM Series – Metric, maximum length 184 inches
Belt Driven Linear Positioning Stages and Slides
Lintech offers a large selection of belt driven linear positioning actuators, slides, stages and tables.
- 120 Series – Small belt driven linear slides
- 180 Series – Large load capacity belt driven linear stages
- 140 Series – Small affordable belt driven linear actuators
- 550 Series – Large capacity thin belt driven linear tables
Rotary Positioning Stages
Lintech has available two different high precision worm gear driven rotary positioning stages.
- 300 Series – Low cost rotary table
- 400 Series – Large load capacity with large through hole
Ball Screw Assemblies
LinTech ball screw assemblies are designed to maximize performance, while providing design flexiblity.
- RS050 – 0.500 inch diameters
- PS062 – 0.625 inch & 16mm diameters
- GS062 – 0.625 inch & 16mm diameters
- RS062 – 9.625 inch diameters
- PS075 – 0.75 inch & 20mm diameters
- GS075 – 0.75 inch& 20mm diameters
- RS075 – 0.75 inch diameters
- RS100 – 1.00 inch diameters
- RS150 – 1.50 inch diameters
Screw Driven Linear Slides and Actuators
Lintech screw driven linear enclosed slides are designed to maximize performance while minimizing physical size and cost.
- 610 Series- IP30 rated totally enclosed
- 90 Series – High speed screw driven round rail
- 100 Series – Small screw driven square rail
- 110 Series – Waycovers on small screw driven table
- 130 Series – Small load capacity & low cost
- 150 Series – Low table height with a large load capacity
- 160 Series – Large load capacity at an economical price
- 170 Series – Large load capacity at an economical price
- 200 Series Low height with a large load capacity
- 250 Series – Low height with a large load capacity
Profile Rail Linear Guides
Lintech has available 3 different profile rail linear guide versions to choose from. There are short, standard, and long block versions available in each series, which allow the user to match the different capacities to the requirements of the application. Each bearing block has available different end and bottom seal versions and a self, long lasting lube option.
- MR Series – Miniature profile
- ARC Series – Standard profile
- HRC Series – Heavy square rail linear guides