Level monitoring on a blood analyser with CQ35

On a blood analyser, comprising a tank for system fluid and a tank for the waste fluid, it is necessary to monitor the levels. The system fluid, which is mixed with the blood to be analysed, must not fall below a minimum level, and the waste fluid must not exceed a maximum level.

Two series SICK CQ35 capacitive proximity sensors are fitted to the tank mountings on each analyser. If the system fluid drops below the minimum limit, or the maximum limit is exceeded in the waste fluid tank, the level sensors provide a signal and the plastic tank is replaced.

The ideal housing dimensions of the CQ35 enable the sensors to be fitted without problems, even in large numbers. The correct operation of the blood analyser is ensured by monitoring the levels.

This is an application from SICK.
Tri-Phase Automation is a SICK distributor in Wisconsin.
Contact Tri-Phase Sales or Get A Quote

Monitoring of oil, petrol and gasoline separators

Monitoring of oil, petrol and gasoline separators.
A water industry solution from Pepperl Fuchs

Using oil separators and oil water separators to protect groundwater sources from oil, gasoline and petrol pollution is crucial. Water, especially groundwater sources used for drinking water and other human use, is a valuable resource that must be protected from pollution. Car repair shops, airport runways and industrial applications can produce oily water runoff that has the potential to cause groundwater contamination.

Close monitoring of oil separators and oil water separators is provided with an electronic alarm system, featuring an early-warning mechanism that is able to recognize critical operating conditions of the separator early enough to prevent any discharge of pollutants into the environment.

Pepperl Fuchs Products: Level Measurement and intrinsically safe mobile devices

Tri-Phase Automation is a automation distributor of Pepperl +Fuchs in Wisconsin. Contact Tri-Phase Sales or Get a Quote